Table of Contents
Advertisement
4 Enter the number of the Auto
Document you want to register
using the Number keys.
Hint
If you make a mistake with the first digit, press the Clear/Stop key and enter the
correct number. If you make a mistake for and digit, press Cancel key and enter
the correct number.
If a document is already registered with that Auto Document number, the name is
shown on the display.
5 Press [Name].
Hint
You cannot omit a document name.
Be sure to register it.
6 Enter the Auto Document name.
Cross-reference
"Entering Text" ⇒ See page 211.
Hint
If the Name is already registered, it is shown on the display. If you want to change
the document name, press the Clear/Stop key and enter another name.
7 Press [OK].
Hint
If you are storing a standard size document, go to step 10.
8 Press [Irreg. Area].
9 Select a size using the
keys and press [OK].
The document name and original
size are shown on the display.
158
and
Advertisement
Table of Contents
