Table of Contents
Advertisement
Enter the "Send Later" function
number with number keys.
Enter the time with the number
keys, or press [Economy TX].
Press [AM ↔ PM] to switch be-
tween AM and PM.
Depending on your area, some
machines may use the 24 hour
clock and you do not have to
press [AM « PM]. For example,
to enter 6PM, enter 18:00.
Hint
If the current time shown on the display is not correct, adjust it. ⇒ See "Adjusting
the Date and Time" on page 207.
When entering numbers smaller than 10, add a leading zero.
If you make a mistake, press the Clear/Stop key and try again.
To cancel Send Later, press [Cancel] and the display will return to the Transmis-
sion Mode menu.
Press [OK].
The Transmission Mode menu is
shown on the display. A check mark
is added to Send Later.
Press [Exit].
The initial display is shown.
Hint
"Send Later" is shown on the display. If you set up another advanced transmission
function (except Polling Reception), "Other" is displayed.
Dial and press the Start key.
To cancel the specified time:
Use a Canceling a Transmission function (see page 110).
79
Advertisement
Table of Contents
