Table of Contents
Advertisement
Page Separation and Length Reduction
(not available in some countries)
When the size of a received message is longer than the paper loaded in the
machine, each page of the message can be split and printed on several sheets
or can be reduced and printed on a single sheet. For example, when A4 L
paper is loaded, this feature splits the received message if the excess length
is about 20 mm or more, and reduces it if the excess length is within about 20
mm. When a message is split, the split mark (
tion and about 10 mm split area is duplicated on the top of the second sheet.
Hint
Your service representative can customize this feature with the following settings.
Bracketed values are defaults.
•Reduction (ON)
•Overprinting (ON)
•Guideline for split (when message is 20 mm longer than paper)
The overprinting length may be changed as follows.
• Guideline for split
• Overprinting length
Reverse Order Printing
Normally, received pages are printed and stacked on the tray in the order
they are received. If you turn this feature on, the machine will start printing
the message from the last page received. By default this feature is turned off.
Switch it on with the User Parameters (see page 166 and 203). Note that
when on, this feature will use Memory Reception.
•Print split mark (ON)
•Overprinting length (10mm)
: 0 ~ 155mm
: 4mm, 10mm, 20mm, 40mm
∗
) is inserted at the split posi-
73
Advertisement
Table of Contents
