Table of Contents
Advertisement
Each of these keys (F1-F4) can be programmed with a function that you use
frequently. When you wish to use that function, instead of having to search
through several menus to find it, just press the appropriate User Function key.
This procedure can be used to edit, delete or change the contents of the User
Function keys.
Hint
At default the following functions are programmed by default.
Key
F1
F2
F3
F4
1 Follow steps
2 Enter the function number for "User Functions" using the Number keys.
3 Press the User Function Key you
want to use.
Hint
If you make a mistake, press [Cancel] and press the correct key.
You can press [Status] to see how the User Function keys are currently pro-
grammed.
If you have the ISDN unit option installed, you can not change User Function key
F4.
4 Enter the function number you
want to register into the User
Function key using the Number
keys and press [OK].
Standard
Manual Reception
Start ManualRX
TEL Mode
Reception Mode
Transmission Result Display
−
to
shown in "Accessing the User Tools" (page 136).
With ISDN Option
←
←
←
G3/G4 Mode Selection
167
Advertisement
Table of Contents
