Table of Contents
Advertisement
Cancelling a Memory Transmission
To cancel a Memory Transmission before it is sent (before pressing the Start key),
press the Clear Modes/Energy Saver key.
To cancel a Memory Transmission while the original is being stored in memory
(after pressing the Start key), press the Clear/Stop key. The machine stops stor-
ing the original. All the scanned data is canceled and not sent.
To cancel a Memory Transmission after it has been stored in memory or while it is
being transmitted, see page 110.
Hint
If you cancel a Memory Transmission after communication starts, some pages
may already sent to the destination.
If the transmission finishes while you are still trying to cancel it, the message has
already still be sent and cannot be canceled.
Cross-reference
For more information, see "Checking and Cancelling the File Settings" on page
110.
Checking the transmission result
Turn the Transmission Result Report (Memory Transmission, see page 27) on if
you want a report to be printed after every successful transmission. If you leave it
off, a report will not be printed after every transmission, but should a transmission
fail, a Communication Failure Report will be printed.
If you turn the Transmission Result Report (Memory Transmission) off, the Error
Report will be printed when the communication on fails.
You can also check the transmission result by examining the Journal (Transaction
Confirmation Report, page 123).You can either print it or scroll through it on the
display. ⇒ See "Displaying the Transmission Result" on page 117.
Sending a fax message immediately
To send a fax message immediately, use Immediate Transmission.
If you have just set up a original for broadcasting, the immedicate transmis-
sion file will interrupt the current communication.
If there are files queued in addition to the file being currently sent, your
original is not be sent until the queued files have been sent.
30
Advertisement
Table of Contents
