Table of Contents
Advertisement
9 Press [OK].
a Press [Exit].
b Press [PrevMenu] three times.
c Press the User Tool key.
1 Follow steps to shown in "Changing the User Tool Settings" (page 136).
2 Enter the function number for "Key Op. Settings" using the Number keys
and press the Enter(#) key within 3 seconds.
3 Enter the function number for "Authorized RX" using the Number keys.
4 Enter the function number for "Delete Sender" using the Number keys.
5 Choose the sender to delete by
entering its code. The RTI/CSI will
flash up.
Hint
If you make a mistake, press [No] and enter a correct number.
6 Press [Yes].
Hint
If you press [No], the sender is not
deleted and the display shown in 5
appears again.
7 Press [Yes].
The sender is deleted.
Hint
If you press [No], the sender is not
deleted and the display shown in 5
appears again.
190
Advertisement
Table of Contents
