Table of Contents
Advertisement
2-Sided Printing
b Press [OK].
c Press [Exit].
d Press [PrevMenu] three times.
e Press the User Tool key.
1 Follow steps to shown in "Changing the User Tool Settings" (page 136).
2 Enter the function number for "Key Op. Settings" using the Number keys
and press the Enter(#) key within 3 seconds.
3 Enter the function number for "Special RX Nos". using the Number keys.
4 Enter the function number for "Delete Sender" using the Number keys.
5 Choose a sender number you
want to delete by entering its code
with the Number keys. The regis-
tered RTI or CSI is flash up.
Hint
If you make a mistake for first digit, press the Clear/Stop key and enter a
correct value.
186
Advertisement
Table of Contents
