Table of Contents
Advertisement
If there is an error, one of the following messages may appear on the display. It
might just flash up briefly, so if you are watching for errors, stay by the machine
and check the display.
Message
Clean Misfeed(s)
Remove originals from Docu-
ment Feeder.
Reset originals and press
Start
Error. Transmission has been
canceled.
Cannot detect original size.
Select size with
press Start key.
<FAX>
Personal Code Access.
Please enter your Personal
Code.
Service call
Functional problem with the
fax. Please contact your ser-
vice representative.
128
Problem and Solution
Memory Transmission:
Orignal misfeed
Remove originals from Document Feeder.
For 1st page, scanning has been cancelled
and scanned original has been deleted.
transmission will not take place.
From 2nd page and after reset the original
and press start.
Immediate transmission:
Original misfeed
Remove originals from Document Feeder.
Scanning has been cancelled and scanned
original has been transmission will not take
place.
Original jammed during Memory Transmission.
Reset originals that haven't been scanned and
press Start.
An error occurred during Immediate Transmis-
sion. Press [OK] and re-send the original.
Hint
There may be a problem with the machine or the
telephone line (e.g. noise or crosstalk). If the er-
ror re-occurs frequently, contact your service rep-
resentative.
The machine failed to detect the size of the
and
original. Press
press the Start key again.
Personal Codes Access are switched on. You
need to enter a previously programmed 4 digit
ID code. For more more information, see page
169.
There is a problem with the fax function. Con-
tact your service representative. The copier
function will still work normally.
or
to select the size and
Advertisement
Table of Contents
