Table of Contents
Advertisement
If a part of a transmission fails because of a line problem, the lost data is
automatically resent. For this feature to work, the other machine must have
ECM. By default, ECM is turned on, but you can change this with the following
procedure.
1 Follow steps to shown in "Accessing the User Tools" (page 136).
2 Enter the function number for "Key Op. Settings" using the Number keys
and press the Enter(#) key within 3 seconds.
3 Enter the function number for
"ECM" using the Number keys.
4 Switch it on or off using the
key and press [OK].
Hint
If you press [Cancel], the previous
setting is not changed and the dis-
play shown in step 3 appears again.
5 Press [PrevMenu].
6 Press the User Tool key.
When you switch Memory Lock On, received messages are stored in memory
and not printed automatically. When a message is received in Memory Lock
mode, the Receive File indicator blinks. To print this message, enter the Memory
Lock ID. A user who does not know the ID cannot print the message. This
prevents an unauthorized person from seeing the message.
To use Memory Lock, program the Memory Lock ID and switch it On.
1 Follow steps to shown in "Changing the User Tool Settings" (page 136).
2 Enter the function number for "Key Op. Settings" using the Number keys
and press the Enter(#) key within 3 seconds.
3 Enter the function number for
"Memory Lock" using the Number
keys.
174
or
Advertisement
Table of Contents
