Table of Contents
Advertisement
8 Press [PrevMenu] three times.
9 Press the User Tool key.
Print this list to find out which Specific Senders are currently programmed.
1 Follow steps to shown in "Changing the User Tool Settings" (page 136).
2 Enter the function number for "Key Op. Settings" using the Number keys
and press the Enter(#) key within 3 seconds.
3 Enter the function number for "Authorized RX" using the Number keys.
4 Enter the function number for "Print Sender list" using the Number keys.
5 Press the Start key.
Hint
When you press [Cancel], the printing stops and the display shown in 4 appears
again.
6 Press [PrevMenu] twice.
7 Press the User Tool key.
191
Advertisement
Table of Contents
