Table of Contents
Advertisement
Multi-step Transfer (Memory Card or Hard Disk option required)
The principles of Transfer Stations can be used to build up a multi-step facsimile
network where messages are passed through several Transfer Stations. By pro-
gramming the end receivers in a Transfer Station Group, you can enable this
machine to transfer messages onto other transfer stations.
For more information, contact your service representative.
This feature can only be used if the machines are made by the same maker.
Cross-reference
See "Multistep Transfer Group" ⇒ See page 175.
Sending the Transfer Result Report
This machine compares the own fax number of the Requesting Party with
the Requesting Party's number programmed in a Quick Dial or Speed Dial,
and if the lower five digits of the two numbers match, it sends the Transfer
Result report to the Requesting Party.
(Example)
Requesting Party's own dial number:
Transfer Station's Quick Dial:
This reports whether transmission to the End Receivers was successful or not.
When the Transfer Station has transferred the message to all End Receivers, it
sends the Transfer Result Report back to the Requesting Party. The machine
prints the report if it cannot be sent back to the Requesting Party. You must
program the fax number of the requesting party in a Quick Dial (see page 138)
or Speed Dial (see page 149) in the Transfer Station.
Before operation
Register the own fax number in advance. ⇒ See "G3 Analog Line setting" on
page 197.
Hint
By default, a portion of the original image is printed on this report. You can turn
this off with the User Parameters (see page 203).
If you wish to limit reception of messages to those from machines of the same
make and with the same Polling ID, contact your service representative to turn
this feature on.
68
001813-11112222
03-11112222
Advertisement
Table of Contents
