Table of Contents
Advertisement
ECM (Error Correction Mode)
This feature automatically resends data that wasn't transmitted successfully
using a system that complies with international standards.
ECM requires that the destination machine has the same feature.
Hint
By default ECM is on. You can change this with the User Parameters (see page
203).
Parallel Memory Transmission
This function dials while the original is being scanned. Standard Memory
Transmission stores the original in memory, then dials the destination. Par-
allel Memory Transmission allows you to quickly determine whether a con-
nection was made. In addition, this function scans the original faster than
Immediate Transmission and is useful when you need to use the original for
another purpose in a hurry.
Hint
By default this feature is turned on. You can change this with the User Parameters
(see page 203).
Restriction
Standard Memory Transmission is used instead of Pararel Memory Transmission
when:
• The line is not connected due to a busy line
• Send Later is used
• Transfer Request is used
• 2-Sided Transmission is used
• You store an original for Memory Transmission while another communication is in
progress
• Two or more destinations are specified
• Only an Auto Document is sent
• When the original is set on the ADF / ARDF
If the Clear/Stop key is pressed, the original jams, or memory becomes full during
Pararel Memory Transmission, the machine stops the transmission then prints the
Transmission Result Report (Memory Transmission) and erases the file.
Pararel Memory Transmission print page numbers. For example, P1, P2.
Hint
If you run out of memory, normal Memory Transmission takes place. When and if
this happens varies depending on the various options you have installed.
32
Advertisement
Table of Contents
