Table of Contents
Advertisement
IMPORTANT
We recommend that you print the Keystroke Program list and keep it
when you register or change a function. ⇒ See page 164.
Restrictions
The maximum number of programs you can register is 56.
You cannot register a program in a Quick Dial key used for another function.
When a registered program key is being used for a Memory Transmission on
standby, the message "This destination is in use for standby transmission file.
Please modify/delete after transmission" is displayed and you cannot change the
function for this key.
1 Follow steps
2 Enter the function number for "Register/Delete" using the Number keys.
3 Enter the function number for
"Store Program" using the Num-
ber keys.
4 Press a Quick Dial key you want
to register.
The "Store Program" display is
shown.
Hint
If you make a mistake, press [Cancel] and press the correct key.
You can press [Status] to see Quick
Dial keys with Keystroke Programs
already in them.
5 Press [Feature].
to
shown in "Accessing the User Tools" (page 136).
153
Advertisement
Table of Contents
