Table of Contents
Advertisement
The machine waits until all pages of the message have been received into
memory before printing the message. This method is used with the following
features:
• Two in one (see page 72)
• Multi-copy when set to multiple copies (see page 71)
• Reverse Order Printing (see page 73)
• Substitute Reception (see page 64)
• 2-sided Printing (Optional Duplex Tray And Memory Card or Hard Disk
required: see page 71)
Restriction
Machine may not receive fax messages when the free memory space is low.
Hint
If the memory free space reaches 0% during Memory Reception, the machine
can no longer receive the current fax message and stops communicating.
IMPORTANT
All the messages stored in memory are deleted if the power is switched off for
more then one hour. However, notae that if the Hard Disk option is installed, all
stored messages are not deleted.
If the machine is left with Memory Reception mode switched on, it may not be
able to receive large numbers of messages or messages with a lot of information.
In such a case, we recommend you to switch Memory Reception mode off or add
memory card.
Receiver (your machine)
Sender
63
Advertisement
Table of Contents
