Table of Contents
Advertisement
Printing the Quick Dial list allows you to check destinations registered in Quick
Dial keys. To print this list, see page 164.
This procedure describes how to find a programmed Quick Dial and delete it.
Restrictions
When a Quick Dial key is being used for a standby Memory Transmission, the
message "This destination is in use for standby transmission file. Please modify/
delete after transmission" is shown and you cannot delete the destination for this
key.
1 Follow steps
2 Enter the function number for "Register/Delete" using the Number keys.
3 Enter the function number for "De-
lete Quick Dial" using the Num-
ber keys.
4 Press the Quick Dial key which
you want to delete.
The registered destination is
shown on the display.
Hint
If you press the wrong key, press [No]
and press the correct key.
You can press [Status] to see Quick
Dial keys that have been already pro-
grammed.
5 Press [Yes].
Hint
If you press [No], the destination is
not deleted and the display is shown
in step 4 appears again.
140
to
shown in "Accessing the User Tools" (page 136).
Advertisement
Table of Contents
