Table of Contents
Advertisement
Close the platen cover or ADF.
Hint
When sending a bound original, the received image may contain some black
areas. To reduce this effect, hold down the original to prevent its bound part from
rising.
Multiple page originals can be placed in the ADF/ARDF. The ADF can scan
single-sided originals only. The ARDF, however, can handle either single-sided
or 2-sided original (double-sided originals).
Restriction
Place all the originals to be sent in the ADF/ARDF all at once. When sending a
fax, the originals cannot be placed in the ADF/ARDF one by one or in sheaves.
In some cases, the scanning speed may be slower.
Hint
When setting pages longer than A3 (420mm)/DLT (17") in the ADF/ARDF, guide
them in with your hand. If you press down on the original or if it is curling up
slightly it might jam.
If your original is larger than the maximum scanning area, do one of the follow-
ings.
· Change the userparameters
· Specify Irregular Scan Ared.
· If the original is jams, press the Clear/Stop key then remove the original care-
fully.
When setting originals longer than A3 (420mm)/DLT (17"), use the "Irregular pa-
per size" setting. If you handle long originals frequently, you can specify that the
machine accepts originals longer than A3 (420mm)/DLT (17") from the ADF auto-
matically. If you choose this setting and there is a paper jam while scanning, the
originals will still be sent. However, there is a posibility that the original will be
damaged. For more details refer to "Irregular Scan Area" on page 160 and User
Parameters on page 203.
If your message is bent or folded, flatten it before you set it.
Set thin originals on the exposure glass.
Cross-reference
For information about the sizes and number of originals that can be placed in the ADF/
ARDF, see "ACCEPTABLE TYPE OF ORIGINALS" on page 18.
23
Advertisement
Table of Contents
