Table of Contents
Advertisement
This function deletes all destinations registered in a Group.
Restrictions
When a registered Group is being used for a Memory Transmission on standby, the
message "This destination is in use for standby transmission file. Please modify/delete
after transmission" is displayed and you cannot delete destinations for this Group.
1 Follow steps
2 Enter the function number for "Register/Delete" using the Number keys.
3 Enter the function number for "De-
lete Group Dial" using the Num-
ber keys.
4 Press the Quick Dial key whose
Group you wish to delete.
The registered Group is shown on
the display.
Hint
If you make a mistake, press [No] and
press the correct key.
You can press [Status] to see the
which Quick Dial keys are pro-
grammed with Groups.
5 Press [Yes].
Hint
If you press [No], the Group is not
deleted and the display shown in step
4 appears again.
6 Press [Yes].
The Group is deleted.
Hint
If you press [No], the Group is not
deleted and the display shown in step
4 appears again.
7 Press the User Tool key.
144
to
shown in "Accessing the User Tools" (page 136).
Advertisement
Table of Contents
