Table of Contents
Advertisement
6 Press [Yes].
Hint
If you press [No], the sender is not
deleted and the display shown in 5
appears again.
7 Press [Yes].
The sender is deleted.
Hint
If you press [No], the sender is not
deleted and the display shown in 5
appears again.
8 Press [PrevMenu] 3 times.
9 Press the User Tool key.
Print this list to find out which specific senders are assigned to which Forward-
ing Stations.
1 Follow steps to shown in "Changing the User Tool Settings" (page 136).
2 Enter the function number for "Key Op. Settings" using the Number keys
and press the Enter(#) key within 3 seconds.
3 Enter the function number for "Forwarding" using the Number keys.
4 Enter the function number for "Print Sender list" using the Number keys.
5 Press the Start key.
Hint
If you press [Cancel] before printing starts, the printing stops.
6 Press [PrevMenu] twice.
7 Press the User Tool key.
182
Advertisement
Table of Contents
