Table of Contents
Advertisement
You can change the volume of the following sounds the machine makes.
On Hook:
When you press the On Hook Dial key.
Transmission
When the machine send a message.
Reception
When the machine receive a message.
Dialing
After pressing the Start key, this sound is output until the line connects to the
destination.
Printing
Sounds when a received message has been printed. ⇒ See "Print Completion
Beep" on page 69.
1 Follow steps to shown in "Changing the User Tool Settings" (page 136).
2 Enter the function number for "Key Op. Settings" using the Number keys
and press the Enter (#) key within 3 seconds.
3 Enter the function number for
"Monitor Volume" using the Num-
ber keys.
4 Select an item you want to adjust pressing [↑Prev.] and [↓Next].
Hint
On Hook, Transmission, Reception, Dialing, and Printing are shown in that order.
192
Advertisement
Table of Contents
