Table of Contents
Advertisement
4 Enter the number of the Auto
Document you want to delete us-
ing the Number keys.
The stored document is shown on
the display.
Hint
If you make a mistake with the first digit, press the Clear/Stop key and enter the
correct number.
5 Press [Yes].
Hint
If you press [No], the document is not
deleted and the display shown in step
4 appears again.
6 Press [Yes].
The Auto Document is deleted.
Hint
If you press [No], the document is not
deleted and the display shown in step
4 appears again.
7 Press the User Tool key.
When you select Irregular Area to scan a non-standard size original, two
custom sizes of original are available (Area 1 and Area 2). Use this function to
register these custom sizes in advance.
You can change the registered size by reprogramming it.
IMPORTANT
When registering or changing an original size, we recommend that you
make a memo of the new size.
Restrictions
For the vertical length (width), select "Auto," "A4 (210 mm)," "B4 (257 mm)," "A3 (297
mm)," "8 1/2 inch," or "11 inch."
For the horizontal length, specify from 128 to 1,200 mm or from 5.5 to 47 inches.
You cannot set a length less than 128 mm or longer than 1,200 mm.
160
Advertisement
Table of Contents
