Table of Contents
Advertisement
1 Follow steps to shown in "Changing the User Tool Settings" (page 136).
2 Enter the function number for "Key Op. Settings" using the Number keys
and press the Enter(#) key within 3 seconds.
3 Enter the function number for
"Authorized RX" using the Number
keys.
4 Enter the function number for
"Register Sender" using the Num-
ber keys.
5 Choose a sender number you reg-
ister.
Hint
If you make a mistake, press the Clear/
Stop key and reenter a correct value.
6 Press [RTI/CSI].
7 Enter an RTI or CSI of a sender
and press [OK].
Cross-reference
"Entering Text" ⇒ See page 211.
8 Select whether or not to register
the sender on a wild card (page
213).
189
Advertisement
Table of Contents
