Enter the number of the Auto
Document you want to send with
the number keys.
Hint
If the list does not contain the Auto Document you want to send, press [Prev.] or [Next].
If you make a mistake, press the Clear/Stop key and try again.
To cancel the Auto Document, press [Cancel]. The Transmission Mode menu is shown.
If you are sending the Auto
Document alone, press [OK]. If
you wish to send it with another
original, press
Press [OK].
The Transmission Mode menu
is redisplayed. A check mark is
added to "Auto Document".
Press [Exit].
The initial display is shown.
Hint
"Auto Document" is shown on the display. If you set up another advanced trans-
mission function (except Polling Reception), "Other" is displayed.
Dial and press the Start key.
86
.