Table of Contents
Advertisement
7 Press [Horiz.].
8 Enter a length using the Number
keys and press [OK].
The specified size is shown on the
display.
Hint
Each time you press [mm inch], the units change between "inch" and "mm" alter-
nately. If you enter a length and change the unit by pressing [mm inch], the
length is converted automatically according to the unit (fractions are rounded off).
For example, when you enter 2, 5, and 0 in millimeters and change to "inch," the
length "9.8 inch" is shown on the display. If you press "mm" again "249 mm" is
displayed.
9 Press [OK].
The display shown in 4 appears
again.
a Press the User Tool key.
1 Follow steps
2 Enter the function number for "Register/Delete" using the Number keys.
3 Enter the function number for "De-
lete Irreg. Area" using the Num-
ber keys.
The registered sizes are dis-
played.
162
to
shown in "Accessing the User Tools" (page 136).
Advertisement
Table of Contents
