Table of Contents
Advertisement
Use this procedure to register the following ID codes.
Confidential ID
This ID is usually required for printing a message received in the Confidential
Reception. ⇒ See "Printing in Confidential Reception" on page 119.
Polling ID
This ID is required for using Transfer Request (page 101), Transfer Station (page
67), Default ID Polling Transmission (page 93), Default ID Polling Reception
(page 97), ID Transmission (page 59), ID Reception (page 68) function.
Memory Lock ID
This ID is required for printing a message received in the Memory Lock mode.
⇒ See "Printing the Memory Lock" on page 121.
Restrictions
A Polling ID can be any combination of digits (0~9) and letters (A-F) except for
0000 and FFFF. When you use Transfer Request, Transfer Station, or ID Transmis-
sion, register the same ID code as that registered on the sender's machine.
A Confidential ID and Memory Lock ID can be any a four digit code except for
0000.
For Confidential ID and Memory Lock ID, the optional memory card or hard disk
are required.
1 Follow steps to shown in "Changing the User Tool Settings" (page 136).
2 Enter the function number for "Key Op. Settings" using the Number keys
and press the Enter (#) key within 3 seconds.
3 Enter the function number for "ID
Code" using the Number keys.
196
Advertisement
Table of Contents
