Table of Contents
Advertisement
When you turn on the machine or return to Copy mode, the machine returns
to the default settings. You can change these settings so that the machine
starts with your most frequently used features selected.
This procedure can be used to change the default settings of the Transmis-
sion mode (Memory/Immediate Transmission) and scanning conditions (Reso-
lution, Original Type, Image Density, and Auto Image Density).
Hint
You can decide whether the machine returns to the default settings after each
communication. ⇒ See "Changing User Parameters" on page 203.
1 Follow steps
2 Enter the function number for "Initial Setup TX" using the Number keys.
The Initial Setup TX menu is shown on the display.
3 Enter the function number using
the Number keys.
Hint
If you make a mistake, press [Can-
cel] and enter the correct number.
4 Select the mode you want to change using the
Hint
If you want to specify other functions, repeat steps 3 and 4.
Example
Transmission Mode
5 Press the User Tool key.
to
shown in "Accessing the User Tools" (page 136).
or
keys and press [OK].
Resolution
165
Advertisement
Table of Contents
