Table of Contents
Advertisement
The display tells you the machine status and guides you through operations.
• Functions that have been selected are shown white on black (e.g.
Keys that you can not select are shown with a dashed outline (e.g.
• All procedures in this manual assume you are in Fax mode. By
default, when you turn the machine on it is in Copy mode. Press
the Fax key change to Fax mode. If you wish the machine to start
in Fax mode, see "CHANGING THE MACHINE'S SETTINGS" in the
General Reference manual.
While the machine is in the standby mode (immediately after it is turned on),
the following display is shown.
Memory Transmission (Initial Display):
HINT
To return the machine to standby mode, perform one of the following:
• If you have set an original and are in the sending process, remove the original.
• If you have not set an original and are in the sending process, press the Clear
modes/Energy saver key.
• If you are in User Tools mode, press the User Tools key.
Immediate Transmission (G3 mode):
14
).
).
Advertisement
Table of Contents
