Table of Contents
Advertisement
ISDN allows two or more terminals (such as a facsimile and digital telephone)
to be connected to a single line. These terminals are identified by their
subaddress numbers. If the terminals connected to the line at a destination
are assigned subaddresses, dialing a subaddress allows you to direct your
fax message to a particular terminal at the destination.
Restriction
The subaddress can only be used with ISDN.
Hint
The subaddress function must be programmed in a User Function key. ⇒ See
"Assigning User Function keys" on page 167.
A subaddress number can be programmed in a Quick Dial or Speed Dial.
If you want to assign a subaddress to your fax machine, contact the service rep-
resentative.
Place an original and select any scan settings you require.
Select either G4 or G3(ISDN).
Dial the fax number with the number keys.
Press the User Function key
(F1 through F3) where the
subaddress function has been
registered.
" / " is displayed.
48
Printer
Facsimile
Error
Error
TX Files
Start
TEL
F1
F2
F3
Status
Manual RX
Mode
123
F4
Stamp
Advertisement
Table of Contents
