Confirming Information About This Unit; Setting The Name Of The Connected Equipment - Sony PC-3000 Operating Instructions Manual

Confirming Information about
This Unit
You can confirm the serial number of this unit.
1
Turn on the power.
2
Press the CONTROL button.
The CONTROL MENU SET INFORMATION
display appears.
CONTROL MENU
SET I NFORMAT I ON
3
Press the SET button.
The serial number appears.
SER. No. 1000001
Setting the Name of the
Connected Equipment
1
Turn on the power.
2
Press the CONTROL button.
The CONTROL MENU TITLING display appears.
CONTROL MENU
T I TL I NG
3
Press the SET button.
The TITLING setting display appears.
T I TL I NG
CH1–2 [ ]
4
Press the > or . button to select the channel
number between 1 and 8 and the ? or / button
to move flashing.
T I TL I NG
CH1–2 [ ]
5
Press the > or . button to select the character of
flashing portion.
Press the ? or / button to move flashing.
T I TL I NG
CH1–2 [ V ]
6
After selecting the character, press the ? or /
button to move flashing.
7
Set the name according to the steps 5 and 6 and
press the SET button to enter the setting.
T I TL I NG
CH1–2 [ VGA ]
Setting the name of the other channel
continuously
You can set the name of all channels in the system.
Follow one of the procedures described below.
When setting other channel instead of
switching the output signal
1
Press the ? button until the channel number
flashes.
2
Press he > or . button to set the new channel
number.
When setting the name while confirming the
output signal
1
Press the SELECT button of the output channel.
2
Set the name according to the steps 5 to 7
described above.
17
(EN)