Gpi Input Setting (Gpi Input Assign Menu) - Sony DVS-9000 User Manual

• Turn the knobs.
Knob
1
3
a) When the MKS-2700 is connected, select a value in the range 1 to 34.
4
To confirm the assignment in step 3, press [GPI Input Set].
This assigns the GPI input, and this is reflected in the status area.
Releasing the assignment of a GPI input port
1
In the DCU >Input Config menu, select what the setting applies to (DCU1
or DCU2) from the <DCU Select> group.
2
In the <Parallel Input Assign> group, if [GPI Input] is on, press it to turn
it off.
3
Turn the knobs to adjust the following parameters.
Knob
1
2
4
In the <Parallel Input Assign> group, press [No Assign].

GPI Input Setting (GPI Input Assign Menu)

To set the trigger type and so on for each GPI input, display the DCU >GPI
Input Assign menu.
To display the GPI Input Assign menu
In the Engineering Setup menu, select VF5 'DCU' and HF2 'GPI Input
Assign.'
The GPI input port setting status appears in the status area.
Making DCU GPI input settings
1
In the DCU >GPI Input Assign menu, using any of the following methods
select what the setting applies to.
Parameter Adjustment
Parallel Input Input port
GPI Input GPI input
Parameter Adjustment
From No First port number
To No Last port number
Setting values
a)
1 to 102
1 to 50
Setting values
1 to To No
From No to 102
401
Setup Relating to DCU