Setting The Input Signal; Setting A Source Name; Selecting Inputs Configurable With A Color Corrector/Hdr Converter - Sony MLS-X1 User Manual

5
Enable/disable the white clip function using the
[White Clip] button.
On: Enable the white clip function.
Press the button on the right of the [White Clip]
button and enter a video signal level in the
numeric keypad window.
Off: Disable the white clip function.
6
Press the [SDR Gain (dB)] button and enter a gain in
the numeric keypad window.
7
In the [Gamma (Table)] group, select a type of
gamma curve.
Standard: Use standard.
Press the button on the right of the [Standard]
button and enter a table number (1 to 7) in the
numeric keypad window.
Press the [Step] button and enter a gamma
strength (step) in the numeric keypad window.
The effect changes in increments of 0.05.
Press the [Level] button and enter a gamma
strength (level) in the numeric keypad window.
Hyper: Use hypergamma.
Press the button on the right of the [Hyper] button
and enter a table number (1 to 4) in the numeric
keypad window.

Setting the Input Signal

This section describes how to set the switcher input
signal.
The number of switcher inputs, number of configurable
format converters, and number of configurable color
correctors/HDR converters will vary depending on the
signal format and the number of boxes.
For details about the number of inputs and the number
that can be configured, see "Number of Switcher
Resources" (page 501).
For details about input numbers, see "Input/Output
Numbers" (page 503).

Setting a Source Name

You can set the source name of an input signal.
1
Open the Home > Setup > System > Input > Input
Adjust menu (19101.31).
2
Select the target input to set.
To select and set multiple inputs, place a check mark
beside the target inputs to set.
To select and set all inputs, place a check mark in the
Select All checkbox.
3
Press the [Source Name] button and enter a source
name (up to 16 characters) using the keyboard.
Note
When multiple inputs are selected, consecutively
numbered source names are set.
For details, see "Name settings when multiple items
are selected" (page 78).
Selecting Inputs Configurable with
a Color Corrector/HDR Converter
You can set inputs that can be configured with a color
corrector/HDR converter.
Note
A color corrector/HDR converter can be configured only
for inputs 1 and multiples of 4 + 1 (1, 5, 9, and so on).
1
Open the Home > Setup > System > Input > Input
Adjust menu (19101.31).
368