Shotbox Register Creation; Creating A Shotbox Register In The Numeric Keypad Control Block - Sony DVS-9000 User Manual

Production switcher system
Hide thumbs Also See for DVS-9000:
Table of Contents

Advertisement

Shotbox Register Creation

The term "shotbox" refers to a function whereby for each specified region any
snapshot or keyframe effect can be recalled simultaneously. For each region,
any snapshot or keyframe effect number can be specified to be recalled.
There is also a setting to enable or disable the auto run function.
For a shotbox overview, see "Shotbox" in Chapter 1 (Volume 1).
You can create (save) shotbox registers in the following control blocks.
• Numeric keypad control block (See "Numeric Keypad Control Block" in
• Menu control block (See "Menu Control Block" in Chapter 2 (Volume 1).)
Creating a Shotbox Register in the Numeric Keypad
Control Block
When you create a shotbox register in the numeric keypad control block, you
carry out separate operations in respect of the snapshot setting data and the
effect setting data, and save in the register. The procedure described here
makes the snapshot settings first, followed by the effect settings.
Creating a shotbox register
1
2
3
4
260

Shotbox Register Creation

Chapter 2 (Volume 1).)
In the numeric keypad control block, press the [SNAPSHOT] button,
turning it on.
This assigns the numeric keypad control block to snapshot operations.
Specify the register number of the snapshot you want to save in a shotbox
register, and then recall it for each region.
For details of the procedure for recalling a register, see "Recalling a
snapshot from the numeric keypad control block" (page 235).
Press the [SHOTBOX] button, turning it on.
This assigns the numeric keypad control block to shotbox operations.
Press the [STORE] button, turning it on.
The [SNAPSHOT] button lights green.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvs-9000sf

Table of Contents