Snapshot Register Operations; Displaying A Snapshot Register - Sony MLS-X1 User Manual

To add the effect dissolve attribute
Set [Effect Diss] in the numeric keypad area to the on
state.
For details about setting an attribute, see "Setting an
attribute" (page 286).
5
Enter a register number in the numeric keypad area.
The currently recalled register number is displayed
on the numeric keypad area display. To select another
register, enter a register number.
For details about selecting a register, see "Selecting
a register" (page 283).
6
Press [Enter].
The snapshot is saved in the specified register.
Note
If you press a register button in which a snapshot is
already saved, the register data will be overwritten.
To undo saving a snapshot
To undo saving immediately after saving a snapshot, set
the [Store Undo Enable] button to the on state and press
the [Undo] button.
Snapshot Register
Operations

Displaying a Snapshot Register

Displaying a multi-region snapshot
register
Open the Home > Register > Snapshot > Edit Register >
Browse Multi Rgn menu (18302.11).
You can check the following information.
[Region] group region display:
Displays the region selection status.
The selected regions are displayed in white
characters, and the reference region is displayed
highlighted.
List on the left:
Displays a list of registers for the selected regions.
• Register number
• Reference region register name
• Number of regions for which data is saved in the
register
• Lock icon
A lock icon is displayed when the reference region
register is locked.
List on the right:
Displays information for each region about the
register selected in the list on the left.
• Region name
The reference region is displayed highlighted.
• Register name
• Lock icon
A lock icon is displayed when a register is locked.
When the [Browse Single Rgn] button is pressed, the
Home > Register > Snapshot > Edit Register > Browse
Single Rgn menu (18302.12) is recalled.
For details, see "Displaying a single-region snapshot
register" (page 286).
To search for a register
Press the [Search] button, enter a character string to
search for in the input field in the displayed window, and
press the [Enter] button.
Only registers containing the entered character string are
displayed.
To select a region
1
Press the [Select] button in the [Region] group.
The [Select Region] window appears.
2
Set the button for the target region to the on state.
285