To select all regions, press [ALL]. To select all
switcher-related regions (M/E, P/P, User), press [SWR
ALL].
6
Press [Assign], turning it on, and select a register using
the following parameter.
No.
Parameter Adjustment
3
Effect Reg
Effect register number
7
Repeat steps 5 and 6 as required to set all effects to be
saved in the master timeline register.
8
In the <Store> group, press [Store].
To return to the state before saving the master
timeline content
In the <Store> group, press [Undo].
Recalling and Executing a
Master Timeline
For details about recalling a master timeline in the
numeric keypad control block, see "Recalling a Register
(Numeric Keypad Control Block)" (page 302).
Recalling and Executing a Master
Timeline (Flexi Pad Control Block)
Pressing the [MASTR EFF] button in the Flexi Pad control
block switches the memory recall section to effect
operation mode for recalling and executing master
timelines. The region set when the master timeline was
saved is recalled.
MASTR EFF button
Memory recall section
Flexi Pad control block
1
In the Flexi Pad control block, press the [MASTR
EFF] button.
This switches the memory recall section to effect
operation mode.
The bank recalled last and register number are
displayed on the top right button in the memory recall
section.
2
Select the target bank for operation using the bank
selection buttons.
320
Bank selection buttons