Clip Transition Operations
For an overview of clip transitions, see "Frame Memory Clip Function" (page
87).
Notes
• The clip transition function is only supported by the MVS-8000A/8000G.
• When a clip transition is selected as the transition type, if one of the wipe
Setting a clip transition
The following example describes the case of a clip transition using FM 1&2
Clip on the M/E-1 bank.
Note
To use a clip transition effectively, the image from the frame memory clip
being played back during the clip transition should be seen in the M/E-1
program output. For example, inserting a key using frame memory output 1 and
frame memory output 2.
1
2
472
Clip Transition Operations
direction selection buttons in the transition control block is lit, it indicates the
direction of clip playback.
Display the M/E-1 >Misc >Transition menu, and in the <Transition Type>
group select "FM1&2 Clip."
Press [Clip Transition].
The Clip Transition menu appears.