Table of Contents
Advertisement
Clip Transition Operations
For an overview of clip transitions, see "Frame Memory Clip Function" (page
84).
Note
When a clip transition is selected as the transition type, if one of the wipe
direction selection buttons in the transition control block is lit, it indicates the
direction of clip playback
Setting a clip transition
The following example describes the case of a clip transition using FM 1&2
Clip on the M/E-1 bank.
Note
To use a clip transition effectively, the image from the frame memory clip
being played back during the clip transition should be seen in the M/E-1
program output. For example, inserting a key using frame memory output 1 and
frame memory output 2.
1
Display the M/E-1 >Misc >Transition menu, and in the <Transition Type>
group select "FM1&2 Clip."
2
Press [Clip Transition].
The Clip Transition menu appears.
Clip Transition Operations
465
Advertisement
Table of Contents
