ABB IRB 6620 Product Manual page 49

Fitting the transport support
Illustration for fitting the transport support
xx1400000944
Fitting the transport support
1
Product manual - IRB 6620
3HAC027151-001 Revision: W
Action
Fit the transport support's lower end to the
robot using the recommended screw joint,
(A) in figure.
© Copyright 2006-2020 ABB. All rights reserved.
2 Installation and commissioning
2.3 Securing the robot with a transport support
B
A
Note
Do not tighten the screw.
See attachment point for the specific ro-
bot in the section
a transport support on page
Continued
Transport position with
45.
Continues on next page
49