Table of Contents
Advertisement
Query Command Library
VERSION: Firmware Version
Function
Command Format
Response Format
Comments
See also
266
This command is used to list the firmware versions installed
in the receiver, including those of the modem and internal
radio.
Syntax
$PASHQ,VERSION[*cc]
Syntax
(Through an example)
$PASHQ,VERSION
RECEIVER version: S211Gd19
SYST fw: 003
GNSS fw: Gd19
KERNEL: 2.6.19-pm4 #201 Mon Nov 17 11:34:39
RESCUE: 2.6.19-rescue
BOOT LOADER: 1.1.5.7
PMU: 2.31.0
API: 1.209
BSP: 1.0-200
GNSS uploader: pm4loader 0.18
GNSS S/N: 702100D200837155
GNSS Options: TJKLEYGSVHC
RFS: 211
GSM :6.53c IMEI : 012345678901234 stack IP :
Internal Radio: PDL V02.58
ULINK uploader: 0.01
CAN controller:
In the GSM.. information line (last line but one), the GSM
version will appear only after the modem has been turned on.
The stack IP version will appear only after a GPRS connection
has been established.
$PASHQ,RID
Advertisement
Table of Contents
