Table of Contents
Advertisement
DIP: Server Connection
Function
Command Format
Relevant Query
Commands
See also
This command is used to connect the receiver to a base via
the base's IP address or host name.
Syntax
$PASHS,DIP,RIP,s1,PRT,d2[,LGN,s3,PWD,s4][*cc]
Parameters
Parameter
s1
IP address (xxx.xxx.xxx.xxx) or host name
d2
Port number
s3
User name (optional)
s4
Password (optional)
*cc
Optional checksum
Comments
Optional fields s3 and s4 need to be specified when the base
used requires a user name and password. In this case, the
receiver sends the $GPUID,s2,s4 command to the base right
after the IP connection has been established.
Examples
Connecting the receiver to IP address 134.20.2.100 and port
number 6666:
$PASHS,DIP,RIP,134.20.2.100,PRT,6666*2C
Connecting the receiver to www.magellangps.com through
port 8080:
$PASHS,DIP,RIP,www.magellangps.com,PRT,8080*66
$PASHQ,MDM
$PASHQ,DIP
$PASHS,MDM
$PASHS,DIP,OFF
Description
Set Command Library
Range
32 char. max.
0-65535
20 char. max.
20 char. max.
*00-*FF
125
Advertisement
Table of Contents
