Page 2
This page is not used. www.magellangps.com N476 User Manual...
Page 3
Do not become distracted by the receiver while driving, and always be fully aware of all driving conditions. It is your responsibility to comply with all traffic laws and to use the N476 and mounting options in such a manner that the user is in compliance with applicable laws.
Page 4
Magellan Technical Support. Charging the N476 An optional AC adapter is available as an accessory for your N476. Use of another type of AC adapter can result in malfunction and/or possible fire hazard due to battery overheating.
Page 5
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." N476 User Manual www.magellangps.com...
Dashboard Screen Map Screen Footer Bar Starting Up Power On, Suspend, Power Off Turning the N476 Receiver On Turning the N476 Receiver Off (Suspend Mode) Turning the N476 Receiver Off (Shutdown) Adjustments Adjusting the Volume Muting the Volume Changing the Data Field...
Page 8
Adding a Contact to the Address Book Editing a Contact Name Editing Contact information Deleting a Contact in the Address Book Adding a Trip to the Address Book Editing the Trip’s Name in the Address Book www.magellangps.com N476 User Manual...
Page 9
Creating a Route to a City Center Creating a Route to an Intersection Creating a Route to a POI (Point of Interest) Creating a Multi Destination Route Adding a Destination to a Route Removing a Destination from a Multi Destination Route Routing N476 User Manual www.magellangps.com...
Page 10
Selecting the Data Field on the Map Screen Cancelling a Route Pause/Resume a Route Detouring Around Traffic Detouring Around a Maneuver Bluetooth Using Bluetooth on the N476 Pairing Your Phone When Answering a Call When Making a Call Instructions Answering a Call Hanging Up Creating a Call with the Dial Pad.
Page 11
Navigation and Maps PhantomALERT Points of Interest Visibility Enable Live Traffic Auto-Zoom on Turns Enable U-Turns Avoid Toll Roads Avoid Unpaved Roads Night Mode Visible Speed Warning Speed Limit Warning Threshold Location Region Set GPS Position Sounds Volume N476 User Manual www.magellangps.com...
Page 12
Smart Volume Turn Warnings Spoken Street Names Audible Speed Warnings Bluetooth Device Name Auto-connect Audible Maneuver Warning Paired Phones To Pair your Phone www.magellangps.com N476 User Manual...
N476 Receiver Home Press the Home button to return to the Map screen from Button anywhere in the N476 receiver. Tap to change between the Dashboard display, map with no content squares, and map with content squares. Power Press and hold to turn the device on or to completely shutdown.
Time of Day Time is transmitted from the GPS satellites using an atomic clock as reference. The N476 factors in the time zone for your location as well as daylight savings time conditions to compute the local time displayed. There are no settings for the time displayed.
Page 15
Bluetooth Displays the current pairing status of the Bluetooth connection. When Status paired to a phone, the N476 receiver can be used as a remote interface for your phone. Bluetooth is paired to a phone. Bluetooth is not paired to a phone.
Speaker On. Volume set by slider bar. Speaker Muted. Current Displays the current location of the N476 receiver in relation to the Location displayed map. Indicator Tap on the Current Location Indicator to get information on your current location.
Location of a fixed speed camera. Map Screen Content Squares There are eight different content squares available on the N476 . Tap the More Tiles arrow (on the footer bar) to view all eight squares. While driving without a route active, the map usually displays the split screen with four squares.
Other traffic incidents can be viewed by flipping through the squares. If you are traveling on a route, the N476 receiver will try to compute a detour around the traffic incident. If a detour is available that will save time, the Detour Traffic button will be enabled.
Tap to bring up phone functions and access to (Bluetooth) Bluetooth settings. Settings Tap to access setting options for the N476 receiver. Fewer tiles Tap to show fewer tiles, then only the map, then to / show show the Dashboard.
Power On, Suspend, Power Off Turning the N476 Receiver On Press and hold the Power button for 2-3 seconds. The Magellan logo may not appear until a few seconds after you release the button. Turning the N476 Receiver Off (Suspend Mode) If you suspend operation, the route and all information is held so you can quickly resume use.
The map updates according to the selected style. You can pan and zoom if you like. To re-center the map on your current location, tap Tap Close or press the Home button to return to the usual map footer. 3-Dimensional N476 User Manual...
2-Dimensional - North Up (Icon to re-center map displayed in lower-left) 2-Dimensional - Heading Up Viewing Current Location Details Tap on the current location icon The Current Location screen is displayed. N476 User Manual...
Select where to save the location (Wish List, My Places or OneTouch). Use the keyboard to enter a name for the location. Tap Save. Press the back arrow ( ) or the Home button to return to the Map screen. N476 User Manual...
Page 24
The keyboard is similar to the keyboard on a smartphone, and is designed to be easy to use. Since there are some differences from a typical smartphone, and for those who have not used a smartphone keyboard, the basics of the N476 keyboard will be explained here. Backspace...
Page 25
When you select an item, its address details are displayed and its location is shown on the map. If you want to look at another item, tap to return to the results list. www.magellangps.com N476 User Manual...
Page 26
This shows the address entry keyboard. You can enter a city or zip code to center the search. Tap Done to return to the POI search screen. For more information See “Routing” on page 23. See also: “Set GPS Position” on page 41. N476 User Manual www.magellangps.com...
Magellan navigation devices. Sign In with your Magellan Account. With your N476 properly connected, it will appear as an icon in the upper left of the screen. Click on the device icon to view device and content status.
Sign In with your Magellan Account. Add places, contacts and trips using the Create New button in Magellan Content Manager. The next time your N476 performs a sync, the changes made in Magellan Content Manager will be updated on your N476. PhantomALERTS PhantomALERTS provide warnings of enforcement and safety locations.
When you save a route, it includes the end point and any intermediate points. These can also be synchronized with the smarteco site. (www.smartgpseco.com, requires a free account for saving and syncing data.) N476 User Manual www.magellangps.com...
). The place names then displays the item edit and item delete icons: Tap on the item edit icon to the right of the place name. ( Use the keyboard to modify the name of the place. When done, tap Save. Tap Done to finish editing. www.magellangps.com N476 User Manual...
From the Map screen, tap the Address Book icon ( Tap the Contacts tab icon Tap the Edit icon ( Tap on the appropriate Edit icon. Use the keyboard to modify the name of the contact. When done, tap Save. Tap Done to finish editing. N476 User Manual www.magellangps.com...
The numeric keyboard is displayed so you can input the number. Tap Done and the keyboard is displayed so you can input the display name. Tap Save to save changes and return to the Contact Edit page. Tap Done when finished editing. www.magellangps.com N476 User Manual...
Create a trip (see Routes ) to be added. When the trip has been entered, tap Save. Enter a name for the trip. Tap Save. Tap Done to finish editing. N476 User Manual www.magellangps.com...
From the Map screen, tap the Address Book icon ( Tap Wish List. .for the location to be deleted or tap Clear All to delete all the Tap the delete icon locations in the Wish List. Tap Done to finish editing. www.magellangps.com N476 User Manual...
From the Map screen, tap the OneTouch button Tap the Edit icon ( Tap the delete icon Confirm the deletion. Tap Done. Editing the Name of a OneTouch Button From the Map screen, tap the OneTouch button Tap the Edit icon ( N476 User Manual www.magellangps.com...
My Places displays the Address Book where you can select the location from your saved places or contacts. Recent displays the list of recent destinations that can be selected. When the location has been chosen, tap Add. Tap Done. www.magellangps.com N476 User Manual...
Select data type to be displayed along the route. Traffic Traffic Alerts, showing the projected delay along the current rouge. If the delay is more than 15% of the entire trip, the delay is shown in red. N476 User Manual www.magellangps.com...
NOTES The N476 will provide audiable alerts while you are routing. If you missed an alert or just want to hear it again, tap on the header with the street name for the maneuver and the message will repeat.
(get gas, store, etc.). Tap the Resume route button once you have completed your task and are ready to begin routing to the original destination. Save The route you are on can be saved to your Address Book under the Trips tab to be accessed again. N476 User Manual www.magellangps.com...
Turn List The Turn List will display all of the maneuvers involved in the route. There is also the option of deleting a maneuver in the list and the N476 will recalculate the route with that maneuver removed. Edit Edit provides the tools needed to add or delete a destination in your route.
Enter the name of one of the streets and select the street from the list. Enter the name of the second street. Select the intersection when it is displayed in the list. Choose how you want the route computed; Fastest, Shortest, or Least Highways. Tap GO. N476 User Manual www.magellangps.com...
Using the instructions found in “Keyboard” on page 9 , search for the desired POI. Select the POI from the list displayed. Choose how you want the route computed; Fastest, Shortest, or Least Highways. Tap GO. www.magellangps.com N476 User Manual...
Removing a Destination from a Multi Destination Route Access the Multi Destination route from either saved Trips in the Address Book or if travelling on the route, tap My Route. on the destination to be removed. N476 User Manual www.magellangps.com...
Turn List. on the maneuver to be detoured around. Confirm by tapping GO. CAUTION Not all maneuvers can be detoured around but the N476 will try to recalculate the route avoiding the maneuver. www.magellangps.com N476 User Manual...
Tap the Bluetooth button to return to the Bluetooth screen. This will not affect the call you are on. When Making a Call The N476 provides all the tools you need to make a call, either from your address book or using an on-screen phone pad. Tapping the Bluetooth button from the Map screen displays a screen where you can generate a call.
NOTES The Contacts list in the Bluetooth section of the N476 is not associat- ed with the Address Book portion of the device. The contacts pre- sented with Bluetooth have been imported from your smartphone. A call can also be generated from the My Places Address Book.
Confirm the emergency call by tapping OK. Making an Call using Speed Dial From the Map screen, tap Tap the speed dial tab Tap on the name in the Speed Dial list that you want to call. N476 User Manual...
Tap on the name in the list that you want to call. The contact will be displayed with all phone numbers associated with that contact. Tap on the desired number. Tap on the Call button to begin the call. N476 User Manual...
The Contacts Phone Book in the N476 will be replaced. Setting Bluetooth to Auto-connect to Smartphone The N476 can be set to automatically connect to a phone that has been previously paired when it is within range. From the Map screen, tap the Settings button.
Select from available choices (as Access the Vehicle Profile screen. applicable). Tap the Width button. Enter your vehicle width in inches. Set Vehicle Weight Access the Vehicle Profile screen. Tap the Weight button. Enter your vehicle weight in pounds. N476 User Manual www.magellangps.com...
Select the regional maps being used (when additional maps are installed) and define how the GPS position is set (via GPS or manually). Sounds Alternate method for setting the volume as well as defining what sounds will be presented. N476 User Manual www.magellangps.com...
NOTES The brighter the screen, the shorter the life of the internal battery. It is recommended that this is checked to provide optimum battery life while the device is operating on its internal battery only. www.magellangps.com N476 User Manual...
View detailed information for the device. (Serial number, the geographic areas being used, information on the maps, software version, etc.) End-User License Agreement Legal statement describing the contract between Magellan and the end-user as to how the software can and cannot be used as well as any restrictions imposed by Magellan. Acknowledgments Recognizes the originators of content data used in the N476N476.
You can cancel, reroute or continue. Night Mode The N476 is normally set to Auto which changes the map colors to a darker scheme during night hours automatically. This can be changed to On (the darker map is on continuously) or Off (the normal map is displayed continuously).
“current location to a place you want to go to. Then your searches will start from there. NOTES When the N476 is turned off, (full shutdown) it will start up with current location in GPS mode. If it is merely suspended, it will ‘wake up’ with its ‘current location’ mode unchanged.
Page 56
Visible Speed Warnings is turned off. Bluetooth Device Name Displays the name of the N476 device that will be displayed on your smartphone while pairing. Auto-connect When checked the N476 will attempt to use Bluetooth to connect to a paired phone whenever in range.