Table of Contents
Advertisement
Chapter 4. RTK Surveying
Uploading Stakeout Points to the Field Terminal
In your office, do the following:
• Connect the field terminal to your office computer using
the USB data cable.
• Make sure ActiveSync is installed on your computer and is
allowed to perform USB connections. If you do not have
ActiveSync installed, download the latest version from the
following web page:
hhttp://www.microsoft.com/windowsmobile/activesync/
default.mspx
• Run GNSS Solutions on your office computer.
• Open the project containing the stakeout points you want
to transfer to the field terminal as your job.
• On the project map view, select all the reference and
target points making up your job.
• Select Project>Upload Positions to External Device..
• Select RTK Job and FAST Survey data collector.
• Click OK.
• Name the job (e.g. MYJOB). Keep the Selected Targets and
References option selected and click OK. This opens the
Data Transfer dialog box.
• In the combo box, select Active Sync and keep Automatic
transfer enabled.
• Click OK to establish the connection with the field
terminal and upload the job (to \MyDevice\FAST
Survey\Data\).
• After the job has been uploaded, turn off the field
terminal, disconnect the USB cable and go to the field
with your surveying equipment to stake out your points.
59
Advertisement
Table of Contents
