Nme,Per: Setting Unique Output Rate For All Nmea Messages - Magellan ProFlex 500 Reference Manual

NME,PER: Setting Unique Output Rate for all NMEA Messages

Function
Command Format
Relevant Query
Command
See also
This command is used to set the same output rate for all
NMEA and Magellan NMEA-like messages. This command
will overwrite all the output rates set individually for each
message type using $PASHS,NME,xxx.
Syntax
$PASHS,NME,PER,f[*cc]
Parameters
Parameter Description
f Output rate
*cc Optional checksum
Example
Setting the output rate to 1 second:
$PASHS,NME,PER,1*45
$PASHQ,NMO
$PASHS,NME
Range Default
0.1-0.9 s
1 s
1-999 s
*00-*FF
Set Command Library
149