Set Command Library
GLO: GLONASS Tracking
Function
Command Format
Relevant Query
Command
See also
136
This command is used to enable or disable GLONASS
tracking. It is valid only if the GLONASS option has been
activated in the receiver.
Syntax
$PASHS,GLO,s1[*cc]
Parameters
Parameter
Enables (ON) or disables (OFF) GLO-
s1
NASS tracking.
*cc
Optional checksum
Example
Enabling GLONASS:
$PASHS,GLO,ON*1C
$PASHQ,GLO
$PASHS,SBA
Description
Range
Default
ON, OFF
ON
*00-*FF