Ecp,On: Powering On Ports B & F - Magellan ProFlex 500 Reference Manual

Set Command Library
ECP,ON: Powering On Ports B & F
Function
Command Format
Relevant Query
Command
See Also
130
This command is used to power on communication ports B
and F. It will also power up the internal port used for the
heading and the CAN controller. By default, ports B and F are
on.
Syntax
$PASHS,ECP,ON[*cc]
Parameters
None.
Example
Turning on ports B and F:
$PASHS,ECP,OFF*0E
$PASHQ,ECP
$PASHS,ECP,OFF
$PASHS,CAN,ON
$PASHS,HDB,ON