Query Command Library
NTR,MTP: Connection to Mount Point
Function
Command Format
Response Format
Relevant Query
Command
NTR,TBL: Source Table
Function
Command Format
Response Format
232
This command is used to read the current NTRIP mount
point.
Syntax
$PASHQ,NTR,MTP[*cc]
Syntax
$PASHR,NTR,MTP,s*cc
Parameters
Parameter
NTRIP mount point
s
OFF: Connection to a mount point not
currently established.
*cc
Checksum
Example
$PASHQ,NTR,MTP
$PASHR,NTR,MTP,NAN2*06
$PASHS,NTR,MTP
This command is used to read the source table stored in the
receiver.
Syntax
$PASHQ,NTR,TBL[*cc]
Syntax
$PASHR,NTR,TBL
SOURCETABLE 200 OK
<source table as specified in the RTCM standard>
ENDSOURCETABLE
Description
Range
100 characters max.
or "OFF"
*00-*FF