Occ: Writing Occupation Data To Raw Data File - Magellan ProFlex 500 Reference Manual

OCC: Writing Occupation Data to Raw Data File

Function
Command Format
Relevant Query
Command
See also
This command is used to write information about the current
occupation to the raw data file being logged.
Syntax
$PASHS,OCC,d1,d2,s3[,s4][*cc]
Parameters
Parameter
Occupation type:
• 0: Static
d1 • 1: Quasi-static
• 2: Dynamic
• 3: Event
Occupation event:
d2 • 0: Begin
• 1: End
s3 Occupation name
s4 Occupation description
*cc Optional checksum
Examples
Starting a static occupation on point "SITE01":
$PASHS,OCC,0,0,SITE01,Park_Entrance*63
Ending the static occupation on point "SITE01":
$PASHS,OCC,0,1,SITE01,Park_Entrance*62
$PASHQ,OCC
$PASHS,REC
$PASHS,ATM
Description
Set Command Library
Range
0-3
0-1
255 characters max.
255 characters max.
*00-*FF
153