Set Command Library
ETH,ON: Powering On the Ethernet Port
Function
Command Format
Relevant Query
Command
See Also
ETH,PAR: Ethernet Parameters
Function
Command Format
132
This command is used to power on the Ethernet port. By
default, the Ethernet port is on.
Syntax
$PASHS,ETH,ON[*cc]
Parameters
None.
Example
Turning on the Ethernet port:
$PASHS,ETH,ON*01
$PASHQ,ETH
$PASHS,ETH,OFF
$PASHS,ETH,PAR
This command is used to set the Ethernet parameters.
Syntax
$PASHS,ETH,PAR[,DHP,s1][,ADD,s2][,MSK,s3][,GTW,s4][,NMS,s5]
[,DN1,s6][,DN2,s7][*cc]