Fls: List Of Raw Data Files - Magellan ProFlex 500 Reference Manual

FLS: List of Raw Data Files

Function
Command Format
Response Format
Example
This command is used to list the raw data files stored in the
selected memory (cf. $PASHS,MEM). An index number is
used in the command fomat to limit the number of listed
files. Files are listed in blocks of 10 files.
Syntax
$PASHQ,FLS,d[*cc]
Parameters
Parameter
File index number ("0" for 1st file, "1" for 2nd file, etc.).
All files with index number equal to or greater than this
d
number will be listed. If d is greater than the highest file
index number, the command is "NAKed".
*cc Optional checksum
Syntax
$PASHR,FLS,d1,d2,d3,n(s4,m5,d6)*cc
Parameters
Parameter
Free memory space, in kbytes, in the selected
d1
memory
Total number of files currently stored in the
d2
selected memory
Number of files listed corresponding to those
d3
matching the command criterion
s4 Site name assigned to the file
File time in the "wwwwdhhmm" format where:
• wwww: GPS week number
m5 • d: Day in week
• hh: Time (hours)
• mm: Time (minutes)
d6 File size in kbytes
*cc Checksum
Listing the files from index number "10":
$PASHQ,FLS,10
$PASHR,FLS,65240,012,02,sit3,146821321,7,sit3,146821321,4*06
Description
Description
Query Command Library
Range
0-99
*00-*FF
Range
000000-
999999
000-999
00-10
4 characters
0000-9999
1-7
00-23
00-59
0-999999
*00-*FF
215