Rtc,Msi: Rtcm Message Status - Magellan ProFlex 500 Reference Manual

Query Command Library

RTC,MSI: RTCM Message Status

Function
Command Format
Response Format
Example
See also
256
This command queries a base receiver for the current RTCM
message status.
Syntax
$PASHQ,RTC,MSI[*cc]
Syntax
$PASHR,RTC,MSI,d1,n(d2,f3)*cc
Parameters
Parameter
Number of RTCM message types in the
d1
RTCM output message
d2 RTCM message type
d3 Message output rate in seconds
*cc Checksum
$PASHQ,RTC,MSI
$PASHR,RTC,MSI,30,1,0.0,3,0.0,16,0.0,18,1.0,19,1.0,20,0.0,21,0.0,22,0.0,23
,31.0,24,13.0,31,0.0,32,0.0,36,0.0,1001,0.0,1002,0.0,1003,0.0,1004,1.0,1005
,0.0,1006,13.0,1007,0.0,1008,13.0,1009,0.0,1010,0.0,1011,0.0,1012,1.0,1013
,0.0,1019,0.0,1020,0.0,1029,0.0,1033,31.0*51
$PASHS,RTC,TYP
Description Range
33
1, 3, 9, 16, 18-24, 31,
32, 34, 1001-1013,
1019, 1020, 1029,
1033, 4095
0-1800
*00-*FF