Table of Contents
Advertisement
Query Command Library
CTS: Handshaking
Function
Command Format
Response Format
Relevant Set
Command
See also
206
This command allows you to query the handshaking (RTS/
CTS) protocol status. If no port is specified in the command,
the response message is sent back to the port that issued the
query command.
Syntax
$PASHQ,CTS (,s1][*cc]
Syntax
$PASHR,CTS,s2*cc
Parameters
Parameter
s1
Port routing the response
s2
Current status of RTS/CTS handshaking protocol ON, OFF
*cc
Checksum
Example
$PASHQ,CTS
$PASHR,CTS,ON*1D
$PASHS,CTS
$PASHQ,PRT
$PASHQ,MDP
Description
Range
A, B, F
*00-*FF
Advertisement
Table of Contents
