Cpd,Net: Rtk Network Operation Mode - Magellan ProFlex 500 Reference Manual

See also

CPD,NET: RTK Network Operation Mode

Function
Command Format
Response Format
Relevant Set
Command
See also
$PASHQ,CPD
This command is used to read the current setting of the RTK
network operation mode.
Syntax
$PASHQ,CPD,NET[*cc]
Syntax
$PASHR,CPD,NET,d*cc
Parameters
Parameter
Current RTK network operation mode:
• 0: Network corrections not processed
• 1: Network corrections processed if available and
d
healthy. The receiver will automatically switch to
"standard" RTK mode if network corrections are no
longer available or healthy.
*cc Checksum
Example
$PASHQ,CPD,NET
$PASHR,CPD,NET,1*4D
The response line reports that the receiver will process
network corrections, if available and healthy.
$PASHS,CPD,NET
$PASHQ,CPD
Description
Query Command Library
Range
0-1
*00-*FF
201